Electrical pondering

[S.Hellman]

Have started building a new outbuilding and have some thoughts regarding the electricity. The supply cable is fused in the meter cabinet, and in the shed, I plan to install a distribution box with a DIN rail to make it look nicer than a junction box with top terminals. Neutral bars and ground bars are quite easy to find online, but a similar bar for phase was much harder to locate. Anyone have suggestions on how to do it?

 

[merbanan]

This is available if you have a slightly thicker cable and you want to connect further for some reason:

https://www.elbutik.se/product.html/kopplingsplint-eks525-5-p

 

[pacman42]

You can also use Wago in the distribution board.

If you want to make it look nice, there's this:
- https://www.ljustema.se/fast-koppli...ingsadapter-foer-din-skena-4055143421942.html

 

[S.Hellman]

Thanks for the tips, but I would like to have something like a strip, so I don't have to bridge several terminals. But maybe there are Wago connectors with more "outlets" than two?

 

[_KirderF_]

If you buy a complete small central, all of this is included.

 

[S.Hellman]

If you buy a ready-made small central unit, all of this is included.

Indeed, you are right. I thought it would be significantly more expensive than it is.
For example, this one: Elcentral

 

[_KirderF_]

It's perfectly fine. Don't forget a JFB, it does its job.

 

[S.Hellman]

It's perfectly fine. Don't forget an RCD, it does its job

Sure, there's an RCD in the meter cabinet that takes care of the cable to the outbuilding.

 

[pacman42]

Thanks for the tips, but I would like to have something like a list, so I don't have to bridge multiple terminals. But maybe there are Wagos with more "ports" than two?

Wago in the picture has five ports...