Searching for post base or whatever it's called

[Claes1969]

Does anyone know where to get these kinds of reinforcements?

 

[Matti_75]

Search for plintjärn

 

[Krille-72]

Search for plintjärn

OP is asking for information on reinforcing. Search for armeringsjärn.

Sorry. I couldn't resist.

 

[Claes1969]

The OP is asking for reinforcement. Search for rebar.

Sorry. I couldn't help myself

Rebar and flat iron together

 

[Krille-72]

Rebar and flat iron together

Exactly. It's usually not a common solution for them to be married. But all ways are good except the bad ones.

 

[prototypen]

Plintjärnen in the picture, that's usually how it looks when you make the järnen yourself.
If you buy ready-made, it looks like this
https://www.byggmax.se/plintjarn-500mm-p238500

Protte

 

[Claes1969]

The foundation iron in the picture, that's how it usually looks when you make the irons yourself.
If you buy ready-made, it looks like this
[link]

Protte

Want to reinforce these by drilling into the concrete and using adhesive in the hole. Then it's good with round rebar.

 

[prototypen]

then just take out the welder and fuse a flat bar with a rebar.
But that concrete looks cracked.

Protte

 

[Claes1969]

then it's just a matter of getting the welder out and fusing a flat bar with a rebar.
But that concrete looks cracked.

Protte

I know but I have 15 more places

 

[Krille-72]

[image]
Want to reinforce these by drilling into the concrete. And use adhesive in the hole. Then it's good to use round rebar

That picture shows that it will be risky to drill into the concrete...

 

[Claes1969]

That picture shows that it becomes risky to drill in the concrete...

Have 15 more to drill into. Can probably drill either to the right or left as well. Anchor mass can probably work wonders too.

 

[useless]

What needs to be reinforced? Are the existing post shoes too weak or are they not fixed in the concrete? If it's the latter, then a little anchor compound won't help, and the concrete blocks need to be redone.

 

[Jocke Best]

Have 15 more to drill in. Can probably drill either to the right or left as well. Anchor mass can probably work wonders too

I think it will be difficult to get a vertical drill hole. If you get the slightest outward angle, the rebar will point outward resulting in looseness.

 

[Claes1969]

Vad är det som ska förstärkas? Är befintliga stolpskor för klena eller sitter dom inte fast i betongen? Om det är det senare så hjälper nog inte lite ankarmassa, utan plintarna måste göras om.[/QUOTE
Det sitter en sån stolpsko på var sida om stolpen. Stormen som var förra våren gjorde att svetsen som är mellan vinkeln och armeringen gick av. De som byggde planket tänkte fel

 

[Claes1969]

I think it will be difficult to get a vertical drill hole. If you get the slightest angle outward, the rebar will point outward resulting in a gap.

Good thinking