Drill hole vs. plug vs. screw

[mull]

I am going to put up a pegboard.

The wall is probably lightweight concrete, but it might be regular concrete. I will check more closely tomorrow.

What should I use to mount the board? There won't be anything particularly heavy hanging on it.

Expansion screws?

Plug + screw?

If I use plugs - what dimensions should the drill have compared to the plug and the screw?

 

[Martin_Blomberg]

I'm going to mount a tool board.

If I use plugs, what dimensions should the drill have in relation to the plug and the screw?

On the plug packaging, it's specified which drill and screw dimensions are suitable. I personally use plugs from Byggmax.

 

[P-plats]

There are plastic plugs that work well in concrete and lightweight concrete, etc.
Check with your nearest hardware or building store!
Expander is excessive in this case...

 

[ByggPutte]

If it is light concrete, there are special plugs for it. You can try drilling with a smaller drill than stated if you try regular plugs.

Best regards, Putte

 

[mull]

I discovered that it actually says on the plug packaging which drill and screw to use. Convenient. I've never noticed it before, but then again, I've only used plugs 1-2 times myself

The wall was light concrete and the tool board is rock solid. Thanks for the answers