Abi wood in Frölunda maybe?
As I interpret it from the pictures (should have been taken closer), it doesn't look like a standard profile. In that case, it might be difficult to fix it by Monday. Otherwise, you can always turn to a custom carpentry shop. For private customers, it is usually best to turn to Beijers. They have a large selection and can obtain most things (if they are standard). For professionals, Derome is probably best. With the help of a profile template (available at Claes Ohlsson), you can copy the profile with greater precision.
If the profile isn't somewhere on the shelf, I would guess it's a lost cause. This firm can manufacture any profile you want, but it won't be cheap if they have to make tools specifically for your list.
http://www.listspecialisten.se/
http://www.listspecialisten.se/
Abi trä made a cool compromise. Not the same but it's for an entire room so it ended up being this one.
Had to pay 1000:- for 18m. He estimated the cost to be at least 4000:- and at least three weeks delivery time if I wanted it newly produced.
They cut off a piece from the top, it was actually a shadow list.
Thanks for the response.
Had to pay 1000:- for 18m. He estimated the cost to be at least 4000:- and at least three weeks delivery time if I wanted it newly produced.
They cut off a piece from the top, it was actually a shadow list.
Thanks for the response.
