Buy bolts

[Claesk]

Where to buy bolt?
M16 10, 9 or 12, 9

Need 8 pcs. And nuts.

Don't know the length.

 

[hantverkare1]

Where to buy bolts?
M16 10, 9 or 12, 9

Need 8 pcs. And nuts.

Don't know the length.

Hardware store

 

[Claesk]

Checked in hörby. Didn't find any.

 

[hantverkare1]

Checked in Hörby. Didn't find any.

Construction store maybe?

 

[PappasHammare]

When I needed them a couple of years ago, I found them at Swedol in Malmö (I think they are also in Lund now). It might have been necessary to buy a whole box. I don't quite remember, but because of this, I have a number of M16-100 lying around with nuts and also some locking nuts... I think there should be some large washers too...

 

[dsub]

In Norrköping, you can buy piece by piece at Swedol.

 

[Claesk]

Will check with Swedol. Must be 10, 9 or 12, 9.

 

[P-plats]

What is commonly referred to as a "bult" is actually a hex bolt, and they are usually difficult to find in higher strength than 10.9. If you need 12.9, the easiest to find is probably an allen bolt...

Give a shout if you don't find what you're looking for nearby.

 

[MathiasS]

Haha, just thought about counting the posts before someone points out that a BULT is not called BULT but SKRUV. 8 posts.

 

[Claesk]

Ok what is a bult?

 

[PappasHammare]

I was just waiting for some "viktigpetter" to comment on that..

BTW I went out and checked the box.. they were 8.8
I also remembered that you have Tools in Lund

 

[dsub]

A bolt is not threaded. Used e.g. to connect a wagon to a tractor.

 

[Claesk]

Okay. No thread at all?

 

[Nimajneb]

 

[stoif]

And I, who have wondered why the wheels on the car won't stay on, will ask the tire workshop to tighten the lug nuts next time