Attach large frameless mirror to wall

[Baskavoda]

Building a gym and have two large (230x90cm) sliding doors with mirrored glass where I will remove the frame and mount the mirrors on the wall.

I simply want to find a good way to put them on the wall. Clas Ohlson sells http://www.clasohlson.com/se/Spegelklammer/40-7043 mirror clips, but I'm somewhat uncertain if they will hold (I can buy many though) and if there shouldn't be better ways.

I'm thinking that it might be possible to buy a simple track that can be mounted where you then place the mirror on and secure similarly at the top.

Any suggestions/ideas?

 

[SBH]

http://www.bauhaus.se/kakellist-lackad-metall-16x55x2400mm.html?gclid=CNjyrf3Gk8UCFaPVcgodPlwA-Q
a strip on the top and one on the bottom? but maybe you want to avoid anything obscuring the mirror

 

[roli]

Gluing it, could that be an option?

 

[Hammarfall]

How did you eventually get the tracks up? I'm wondering if the classes clamps work, and how it would look with a tile strip. The aluminum tracks from Glasmästarn didn't fit.

 

[Baskavoda]

How did you finally get the tracks up? I'm wondering if classes clips would work, and how it would look with a tile strip. The glassmaker's aluminum tracks didn't fit.

I left the frame on the mirror and screwed it through instead, so I'm probably not of much help unfortunately.

 

[Hammarfall]

Thank you for the response! I'll continue researching further.

 

[Tagepike]

Thanks for the answer! I'll do more research.

Did you find any way?
I'm also going to put up mirrors from wardrobe doors but without a frame😁

 

[Hammarfall]

Did you find a way?
I'm also going to put up mirrors from wardrobe doors but without a frame😁

Eventually, I bought the mirror and rails from the glazier.

 

[Tagepike]

Thanks for the reply, I'll see if I can find skenor then 👍