Right now we have an uninsulated basement with a Platon mat on the outside for drainage. We would like to add insulation to the basement from the outside and are faced with the choice of insulating just below ground level or the entire wall all the way down.

The company we got a quote from doesn't think it's worth the money to go all the way down, but I would still like to get tips, suggestions, and pros/cons of doing either. Can anyone provide some information on what the differences mean for me?

//Mikael Monnier
 
It may be worth adding that we will be building a bathroom/laundry room in the basement. (Fully tiled rooms with underfloor heating)
 
How much of the basement wall is above and below ground, respectively?
 
internally it's 90cm above ground and 110 below ground
 
When sizing heating systems, it is commonly said that a basement requires about half as much output as a floor above ground. What I want to convey with this is that, energy-wise, you won't recoup the cost of the measure below ground. The Platon mat is already installed, and measures have been taken to reduce moisture. Is it otherwise a livable environment in the basement?

I think you can install insulation, like Isodrän, above ground now, and the day you eventually need to re-drain, you can possibly continue below ground. Laying it below ground costs you approximately 1500-2000 SEK per linear meter.
 
The latest measurement showed "normal" values for humidity.

The company we got the quote from wants 82,000 SEK after the ROT deduction to insulate above ground (7cm thick, and they go down about 1 decimeter below ground), apply plaster, and replace 6x 6x10 windows.

For now, we are satisfied with starting like that and then going all the way down the day we re-drain. Whenever that will be. Right now, I believe the carpet is about 6-10 years old.
 
Then it will last at least another 20 years.
 
Big thanks for the great answer. Have a nice day.
 
Click here to reply
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.