I'm considering getting Husfix to fill in all the ugly old plug holes left by the previous tenant in my apartment, but I've never done anything like this before, so I have a few questions (hope this is the right forum..)

The walls are wallpapered, how can I best avoid messing up the wallpaper? It feels like I might need some kind of small cartridge syringe or tube since I probably won't be mixing large amounts of Husfix. I can't see how using a putty knife would work to just push putty into the holes without getting it on the wallpaper?
I feel like I want to push the Husfix all the way in as much as possible.

Any tips?
 
Last edited:
Or would Multifill be better to get?
But maybe it's worse.
 
  • Like
Thomas59
  • Laddar…
S
Yes. If you don't want to mess with filler, then use paint caulk.
If there are many and large holes, ask if you can get them fixed.
Then, actually, the previous tenant should have already fixed the holes.
 
If it's a rental, the landlord should ensure to repair damages caused by the previous tenant. Has a move-out inspection been conducted?
 
Paxman said:
If it is a rental apartment, the landlord should ensure that damages caused by the previous tenant are repaired. Has an inspection been done?
The landlord never restores things that count as normal wear and tear, right? Holes from pictures, etc., are considered normal wear and tear so neither the previous tenant nor the landlord needs to restore them. At least that's how I understand it.
 
Place a small dab on an ice cream stick, move it towards the hole, and push it in with another stick.
 
S
panodil said:
The landlord never restores things that count as normal wear and tear, right? Holes after pictures, etc., are considered normal wear and tear, so neither the previous tenant nor the landlord needs to restore them. That's how I've understood it.
if there are many and large ones, the tenant should fix the holes.
there are those who fix with wallpaper pieces on the dowel holes. not particularly nice
 
Paxman said:
If it's a rental property, the landlord should ensure to repair damages caused by the previous tenant. Has a move-out inspection been conducted?
It would take quite a lot of holes for it not to be considered normal; mirror walls from the 80s with all their screw holes are not considered unusual wear and tear.
 
S
sure have looked at jobs where the walls are full of plug holes
 
It probably varies from case to case. When I moved out of my rental, I left a lot of large holes from an ELFA shelving system along two of the four walls. I talked to the landlord, and he said that the entire apartment would be getting new finishes anyway, so I didn't need to fix it. If it wasn't time for that, I would have had to restore it myself as the departing tenant. Therefore, TS shouldn't be in the situation they are; the previous tenant should have fixed it, or the landlord should have done it before moving in. But as mentioned, there may be different rules for different landlords...
 
Oh, this became quite a discussion. Yes, it's true that the landlord didn't do anything about it, although I called and followed up on it after moving in, and requested a rather information-poor inspection report. But at least I have some pictures of how it looked when I moved in.

Anyway, I'll have to keep considering what's best, house fix or one strike, I was hoping there was something ready-made in a tube or some smaller empty tube with a long nozzle that you could fill yourself and then clean.
 
One strike filler is available on cartridge for skeleton gun.
 
jonko said:
One strike filler is available in cartridges for skeleton guns.
That's great, thanks!

But.. is it possible to buy it somewhere? Hmm..
 
Last edited:
I bought it at Fredells in Stockholm, but I would think that most building/paint stores can order it if they don't have it in their regular assortment.

Otherwise, you can always buy empty cartridges and fill them yourself with OSF from a 1L can.
 
Vi vill skicka notiser för ämnen du bevakar och händelser som berör dig.