Bit holder with screw lock

[Chic0]

Hello. I would need tips on a bit holder that can also lock the screw with a magnet. It's important that I can replace bits, as I have several that I want to use up first before I move on to other variants. So I want to be able to replace bits but also for it to hold the screw while I'm fastening it. Best regards.

 

[Mugmaz]

Wera ringmagnet.

 

[useless]

Doesn't that 'feature' essentially apply to all bit holders, including the cheapest ones from Biltema?

https://www.biltema.se/verktyg/handverktyg/bits/bitstillbehor/bitshallare-2000019475

 

[Chic0]

That 'feature' is pretty much in all bit holders including the cheapest ones from Biltema?

[link]

No, not all. Most look like they do, but they don't. They only hold the bits, but not the screw.

 

[Kaboff]

Run wera
https://www.google.com/aclk?sa=L&ai...ocphy=1012228&hvtargid=pla-421247830482&psc=1

 

[Chic0]

Drives Wera
[link]

Over 300 bucks feels a bit much for such a simple tool. But saw that someone else talked about a Wera.

 

[useless]

No, not all. Most look like they do but don't. They only hold the bits, not the screw.

Ok. I have some from Biltema that hold the screw. Also some more expensive ones from dewalt and bosch, but haven't noticed a major difference.

 

[Mazen]

Run this and as long as the head isn't too small for the magnetic ring, the screw will stay in place.
https://www.verktygsvaruhuset.se/pr...MIg6KpvcCP7gIVE5ayCh06TwRoEAQYAyABEgI42_D_BwE

 

[Chic0]

Use this and as long as the head isn't too small for the magnet ring, the screw will stay in place..
[link]

Exactly what I'm looking for. Thanks, I'll give it a try.

 

[Chic0]

Ok. I have some from Biltema that hold the screw. Also some more expensive ones from Dewalt and Bosch, but haven't noticed any major difference.

Would be nice with pictures if you have any

 

[Chic0]

Use this one and as long as the head is not too small for the magnet ring, the screw will stay in place..
[link]

By the way, can it take regular bits? Because I need to use all the ones I have right now. Bought 2 packs of loose × bits.

 

[Mazen]

By the way, can it take regular bits? Because I need to use all the ones I have right now. Bought 2 packs of loose × bits

Yep. It's a "regular" bit holder with a plastic sleeve that you pull on after you insert the bit set.

 

[Chic0]

Yep. It's a "regular" bit holder with a plastic sleeve that you pull on after you insert the bit set.
[image]

Perfect, will have to order, thanks.

 

[Tjrex]

http://www.fast-fastening.com/fast/IboxServlet?p=IXK090&AID=298044

This holds a slightly longer screw with..

 

[Chic0]

[link]

This holds a slightly longer screw with..

Can't see any picture of it?