Wanted: Smooth Ceiling Moulding 30s

[ThorwaldH]

Looking for a cornice as shown in the image. I've searched in many places but haven't found one. As far as I know, it's a very common cornice from the 1920s-40s, but now it seems hard to find. Exact measurements/material aren't necessary, but this is a cove cornice that extends about 4cm in each direction. Similar measurements might work; it's the shape I'm after. If there's a supplier in the Stockholm area, that's a plus. Second-hand could also work.

 

[larsbj]

A bit more radius perhaps but roughly the same width.

20X69 HÅLKÄLSLIST VIT L=2,4M | Beijer Byggmaterial

 

[ThorwaldH]

A little more radius maybe but about the same width.

20X69 HÅLKÄLSLIST VIT L=2,4M | Beijer Byggmaterial

Thanks for the tip. Unfortunately, this one and similar ones have an edge that approaches 10mm. I need to find one with 1-2mm that can be mounted to look like a smooth transition between wall and ceiling.

 

[Viktor.J]

That was a nice cornice you found! I would have liked something similar, hope you find it!

 

[garvin]

Panel and moulding. I think they are called Stockholm.
https://www.panelochlist.se/

 

[larsbj]

Thanks for the tip. Unfortunately, this one and similar ones have an edge approaching 10mm. I need to find one with 1-2mm that can be mounted to look like a smooth transition between wall and ceiling.

You'll have to bring out the rip saw, or have a reason to buy one

 

[Beaam]

Looking for a cornice according to the picture. I've searched in many places but haven't found any. As far as I know, a very common molding from the 20-40s, but now it seems hard to find. Exact measurements/material aren't necessary, but this is a cove molding that extends about 4cm in each direction. Similar measurements might work; it's the shape I'm after. If there's a supplier in the Stockholm area, that's a plus. Used can also work.

Hello!
Did you find something similar? I'm also looking for something like this.
Thanks!

 

[Höghus]

Is plastic excluded?
https://www.byggmax.se/taklist-axxent-cx126-vit-p662014

/Höghus

 

[Liljeros]

I would buy a standard and plane the edges with a regular handheld electric planer. Alternatively, go for the plastic version...

 

[imported_Benno]

I "recycled" mine from the 1920s. They are brittle like mariekex when you take them down, so I had to piece them together with wood glue. Then scrape them clean from a thin paper layer that covered the transition between the tension paper on the ceiling and on the wall. The newly manufactured ones don't look the same, but you can custom order from a flexible planing mill if there are enough meters.

 

[Beaam]

Is plastic excluded?
[link]

/Höghus

No, not at all., I think it's a very good solution actually.
Thank you so much for your help!